Westlake Electronic Supply

14071-B NE 200th St

Woodinville, WA 98072

Site Map: AJA




AJA ADA4

Audio A/D and D/A Converter, 4-ch. Bi-di

ADA4 4-Channel Bi-Directional Audio A/D & D/A Converter The ADA4 is a 4-channel converter that can be configured as a 4-channel A/D, a 4-channel D/A, 2-channel A/D and 2-channel D/A, or an AES sychronizer. The ADA4 can accept a AES11, wordclock or video sync/color black reference input for synchronization. Reference input and synchronization are automatic. Audio levels are configurable via dipswitch control.

  • Simultaneous A/D and D/A, or AES Synchronizer
  • Full-time AES11 low jitter reference output
  • Up to 4 channels of balanced analog to AES/EBU audio
  • Up to 4 channels of AES/EBU to balanced analog audio
  • Supplied XLR breakout cable
  • AES11/Wordclock/Tri-level Sync/Color Black Reference Loop
  • Adjustable Audio Levels
  • Sample Rate Conversion Between 96KHz and 48KHz
  • Dipswitch configuration 5-18VDC Power
     
    ADA4 Specifications 
    Analog Audio I/O 
    Balanced, XLR, one channel per XLR connector 
    AES Audio I/O 
    Balanced 110 ohm, XLR, two channels per XLR connector 
    Analog Audio Levels 
    +24dBu (SMPTE RP155), +18dBu (EBU R68), +10dBV (consumer +12.2 dBu) 
    Audio Converters 
    24 bit, 48/96 KHz 
    User Controls 
    (External Dipswitch) 
    Channel 1/2: A/D, D/A 
    Channel 3/4: A/D, D/A 
    Audio Level: Pro/Consumer 
    Audio Level: High/Low 
    Reference Loop 
    75 Ohm (unterminated). HD/SD Sync, AES-11, or Wordclock (48/96 KHz) 
    Size 
    5.8" x 3.1" x 1" (147 x 79 x 25 mm) 
    Power 
    +5-18VDC, 3 watts. Requires Power Supply 
    


    AJA C10SP-C

    SERIAL TO PARALLEL CONV.


    AJA C10WP

    POWER SUPPLY C10


    AJA D10AD

    A/D Component/Composite to SD-SDI

    Model D10AD - Component or Composite Analog to SDI Converter
    The D10AD provides excellent quality 10-bit conversion of component or composite analog video to SDI. The D10AD accepts YPbPr (SMPTE, EBU-N10), Betacam, or RGB component inputs and NTSC/PAL or YC (S-Video) composite inputs. The D10AD features a 3 Line Adaptive Comb Filter for high quality decoding of composite sources. The comb filter can be switched to 2 line or notch modes for minimum delay requirements. NTSC/PAL configuration is automatic. Video format, AGC, and pedestal are all user configurable via dipswitches.

    Specifications:
    Inputs: YPbPr (SMPTE, EBU-N10), Betacam, RGB, NTSC, PAL,
         YC (S-Video) 3x BNC Outputs: SDI (SMPTE 259M) 4x BNC
    A/D Converters: 10-bits, 2x Oversampling
    Frequency Resp: Y +/- .15dB to 5.5 Mhz, C +/- .15dB to 2.5Mhz,
         Less than .5% K Factor (2T)
    User Controls: External Dipswitch
    Input Video Format
    Pedestal Present/Not Present
    AGC On/Off
    Power: 5VDC Regulated, 4 Watts
    Size: 5.8" x 3.1" x 1" (147 x 79 x 25mm)


    AJA D10C2

    D/A SD-SDI to Component or Composite 10

    Model D10C2 - SDI to Analog Component/Composite Converter The D10C2 SDI to Analog Video Converter provides excellent quality 10-bit conversion of SDI to analog component or composite video at a low cost. In the Component mode, the D10C2 outputs are user configurable to YPbPr (SMPTE, EBU-N10), Betacam, or RGB. In the Composite mode, the D10C2 provides 2 composite outputs and a YC (S-Video) output. The D10C2 also provides two re- clocked, loop-thru SDI outputs and a composite sync output (Component mode). All functions are user configurable via dip-switches.

  • Excellent Quality 10-bit Universal D/A Conversion
  • Full 10-bit Data Path, 4x Oversampling
  • SDI Input, 2 Re-Clocked, Loop-Thru SDI Outputs
  • Component or Composite Analog Output
  • YPbPr, Betcam, or RGB Component Formats
  • NTSC or PAL Composite Formats
  • Digital Noise Reduction
  • Low Cost
     
    Specifications:  
    Inputs: SDI (SMPTE 259M), 1x BNC
    Outputs:
    For Component Input Only (270Mb):
    YPbPr - SMPTE, EBU-N10, Betcam,
    RGB, 3 x BNC
    Sync, 1 x BNC
    For Composite Input Only (142/177Mb):
    NTSC/PAL 1 x BNC
    YC (S-Video), 2x BNC  
    Re-Clocked Loop-Thru SDI, 2 x BNC
    D/A Converters: 10-bit, 4x oversampling
    Frequency Response:
    Y +/- .15dB to 5.5Mhz
    C +/- .15dB to 2.5 Mhz (Component)
    C +/- .15dB to 1.3Mhz (Composite)
    Less Than .5% K Factor (2T)
    
    Power: 5VDC Regulated, 4 Watts 
    Size: 5.8" x 3.1" x 1" (147 x 79 x 25mm)
    


    AJA D10CE

    D/A SD-SDI to Component and Composite

    Model D10CE - Universal SDI to Analog Converter

  • Excellent Quality 10-bit Universal D/A Conversion
  • Full 10-bit Data Path, 4x Oversampling
  • SDI Input, 2 Re-Clocked, Loop-Thru SDI Outputs
  • Simultaneous Component and Composite Analog Outputs
  • YPbPr, Betacam, or RGB Component Formats
  • NTSC or PAL Composite Formats
  • Precision PLL Jitter Filter For Stable Composite Outputs
  • Digital Noise Reduction
  • Low Cost The D10CE SDI to Analog Video Converter provides excellent quality 10-bit conversion of SDI to both component and composite video formats simultaneously. The component outputs are user configurable to YPbPr, (SMPTE, EBU-N10), Betacam, or RGB (or composite YC). The composite output is user configurable to composite video or sync. The component and composite outputs are completely independent including optimum chroma filtering for each and independent pedestal configuration. The D10CE also features an exclusive PLL jitter filter/memory to reduce the effects of SDI jitter on the output analog video. This feature, along with the precision 4x oversampled D/A filters, provides the highest quality analog outputs including very low phase noise in composite outputs. The D10CE also provides two re-clocked, loop-thru SDI outputs. All functions are user configurable via dipswitches. At AJA, we build professional digital video solutions for the broadcast and post-production markets. Our engineering staff are broadcast video-industry experts that have created all of our products from the ground up expressely for video professionals. AJA’s miniature stand-alone converters are available in both SDI and HD product lines, with a full range of conversion and other capabilities.
    Specifications:  
    Inputs: SDI (SMPTE 259M) 
    Outputs:
    Simultaneous Component and Composite Output
    YPbPr - SMPTE, EBU-N10, Betacam, RGB, NTSC, PAL,
    YC (S-Video), 3x BNC
    NTSC/PAL or Sync, 1x BNC
    Re-Clocked, Loop-Thru SDI, 2x BNC
    D/A Converters:
    10-bit, 4x Oversampling
    Clock Jitter Filtering to 2.5Hz
    Frequency Resp:
    Y +/- .15dB to 5.5Mhz
    C +/- .15dB to 2.5Mhz (Component)
    C +/- .15dB to 1.3Mhz (Composite)
    Less Than .5% K Factor (2T)
    User Controls: External Dipswitch
    Video Format
    Pedestal
    Narrow/Wide Blanking
    Audio Group 1 - 4
    Digital Noise Reduction
    Power: 5VDC Regulated, 4 Watts 
    Size: 5.8" x 3.1" x 1" (147 x 79 x 25mm)
    


    AJA D4E

    D/A SDI to NTSC/PAL (2 outputs) or Y/C

    Model D4E - Serial to NTSC/PAL Encoder The D4E SDI Encoder provides the lowest cost all-digital conversion of SDI to analog NTSC or PAL. The D4E is useful for monitoring, level and phase checking, dubbing etc. The D4E automatically adapts to NTSC or PAL video standards and outputs analog NTSC (525 line inputs) or PAL (625 line inputs). Pedestal and narrow/wide H/V blanking are user configurable via dip-switches. The D4E encodes the full dynamic range of input video. Levels below black and above white are not clipped.

  • Lowest Cost SDI to NTSC/PAL Available
  • 1 SDI Input, 2 Composite/YC Analog Outputs
  • Automatic NTSC/PAL Selection
  • Built-In Test Pattern
  • Ultra Miniature Size
    Specifications:  
    Inputs: SDI (SMPTE 259M), 1x BNC
    Outputs:
    NTSC, PAL, 2x BNC
    Or NTSC/PAL YC (S-Video), 2x BNC
    User Controls: External Dipswitch
    Video Format
    Pedestal
    H/V Blanking
    Test Pattern (Requires valid SDI Input)
    Power: 5VDC Regulated, 2 Watts 
    Size: 5.1" x 1.8" x 1" (131 x 44 x 25mm)
    


    AJA D5CE

    D/A SDI to NTSC/PAL (3 outputs) or Y/C

    Model D5CE - Serial to NTSC/PAL or Component Converter The D5CE provides low cost, all digital conversion of SDI to either composite or component analog video. Three analog BNC outputs are user configurable to cover a wide range of format combinations including 3 composite, 1 composite and Y/C, YPbPr (SMPTE, EBU-N10), Betacam, or RGB. The D5CE also features a re-clocked, loop-thru SDI output. The D5CE automatically adapts to NTSC or PAL video standards. Pedestal and narrow/wide H/V blanking are user configurable via dip-switches.

  • Low Cost SDI to Component or Composite Analog
  • User Selectable Composite/YC or Component Outputs
  • YPbPr, Betacam, or RGB Component Formats
  • Re-Clocked Loop-Thru SDI Output
  • Automatic NTSC/PAL Selection
  • User Selectable Vertical/Horizontal Blanking
     
     Specifications:  
     Inputs: SDI (SMPTE 259M), 1x BNC
    Outputs:
    YPbPr - SMPTE, EBU-N10, Betacam, RGB, 3 x BNC
    Or NTSC, PAL, 3 x BNC
    Or NTSC/PAL and YC, 3 x BNC
    Loop-Thru SDI, Re-Clocking, 1 x BNC
    
    User Controls: External Dipswitch
    Video Format
    Pedestal
    H/V Blanking
    
    Power: 5VDC Regulated, 2 Watts 
    Size: 5.1" x 2.4" x 1" (131 x 61 x 25mm)
    


    AJA D5D

    A/D Composite or YC to SD-SDI

    Model D5D - NTSC/PAL to Serial Decoder The D5D Decoder provides low cost, all digital decoding of analog NTSC/PAL or Y/C (S-Video) to SDI. The D5D is useful for bringing video from time-base corrected analog composite equipment into a serial digital environment. The D5D features a crystal PLL jitter filter/memory to reduce jitter in the SDI outputs. The D5D decodes the full dynamic range of input video. Values below black and above white are not clipped. In the NTSC mode, the removal of the 7.5 IRE pedestal can be enabled by external dip-switch selection.

  • Analog Composite/YC to SDI Conversion
  • Selectable 2 or 3 Line Adaptive Comb Filter
  • Three SDI Outputs
  • Crystal PLL Jitter Filter
  • Automatically Configures to NTSC/PAL
  • Dip-Switch Selectable Pedestal
  • Low Cost
    Specifications:  
    Inputs: NTSC/PAL, YC (S Video), 2 x BNC
    Outputs: SDI (SMPTE 259M), 3 x BNC
    Frequency Response:
    +/- 0.25dB to 5Mhz
    - <1% 2T K Factor (Y)
    - <1.5% Differential Gain
    - <1.5 Degree Differential Phase
    User Controls: External Dipswitch
    Pedestal In NTSC Mode
    Narrow/Wide Blanking
    2 or 3 Line Comb
    Power: 5VDC Regulated, 3.5 Watts 
    Size: 5.1" x 2.4" x 1" (131 x 61 x 25mm)
    


    AJA D5DA

    SD-SDI 1x4 MultiFormat Distribution Amp

    Model D5DA - Serial Distribution Amplifier The D5DA is a multi-format, 1x4 reclocking SDI Distribution Amplifier. The D5DA can be used as a low cost SDI DA or repeater. The SDI input is re-clocked and equalized to 300 meters of cable. In addition, the multi-standard feature allows the D5DA to automatically adapt to 143, 177, 270, or 360Mb SDI inputs automatically.

  • Compact 1x4 Re-Clocking SDI Distribution Amplifier
  • Low Cost
  • Automatic Multi-Standard
  • Useful as a Repeater
     Specifications:  
     Formats: 143, 177, 270, 360 Mb, Auto Select
    
    Inputs: 1 SDI (SMPTE 259M), 1 x BNC
    Outputs: 4 SDI (SMPTE 259M), Equalizing and reclocking, 4 x BNC
    
    Return Loss: >15dB - 270Mhz (Input and Output)
    User Controls: External Dipswitch
    Pedestal In NTSC Mode
    Narrow/Wide Blanking
    2 or 3 Line Comb
    
    Power: 5VDC Regulated, 2 Watts 
    Size: 5.1" x 2.4" x 1" (131 x 61 x 25mm)
    


    AJA DWP

    Power Supply, 110V to 5V Regulated

    The DWP is a miniature high quality power supply for all AJA’s standalone products. Custom manufactured for AJA, the DWP is so small it does not cover the adjacent socket in power strips. With a 2x power over-rating and a molded, latching, circular connector with gold pins, the DWP meets the high reliability requirements of the professional video industry.

  • 100-240v, 50/60Hz Universal input
  • 5 volt regulated output
  • 7.5 watt capacity
  • Circular, latching output connector with gold pins


    AJA DWP-U

    Universal Input Power Supply, 110-220V,

    The DWP-U is an in-line universal input version of the DWP which can accept a power cord anywhere in the world.
    100-240v, 50/60Hz Universal input
    5 volt regulated output
     
     
    **Note:  IEC Computer type cord is NOT included**
     
     

    AJA FR1

    1RU, 4-Slot Frame, 40W, Forced Air Cooli

    Models FR1 & FR2 - R Series Rack Mount Frames The FR1 and FR2 mounting frames provide high density rackmount solutions for AJA`s R-Series modules. The FR1 is a 1 RU frame with 4 slots; the FR2 is a 2 RU frame with 10 slots. Both frames feature high capacity power supplies with no power restrictions for any module combination. Also, both frames feature multi- fan forced-air cooling which provides ample cooling capacity without the need for an empty rack space above the units. Both frames feature optional redundant power supplies - the FR2`s power supplies are easily changed from the front of the unit. Also, both the FR1 and FR2 feature a frame color black reference input which is distributed to all slots.

    FR1 Specifications     
     Capacity:
    4 Slots, 1 Rack Unit
    Inputs:
    RJ 45 Communications Port/Power Supply Monitoring
    Reference Input, BNC
    Power:
    40 Watt Capacity
    Universal Input 90-240 VAC Power Supply
    Optional Redundant Power Supply, Diode Isolated
    Cooling:
    Multiple Fan Forced Air
    
    Size:
    19" x 1.75" x 15.75" (1RU)
    - Leitch® 6800 Series Compatible
    


    AJA FS1

    Universal SD/HD Audio/Video Frame Sync/C


    AJA GEN10

    HD/SD Sync Generator, simultaneous Black


    AJA HA5

    HDMI to HD/SD SDI, includes 1-Meter HDMI

    AJA HA5 HDMI to SDI/HD-SDI Video and Audio Converter


    AJA HD10A

    HD A/D, 10-bit, HD YPbPr/RGB to HD-SDI f

    Model HD10A - HDTV 10-bit Analog to Digital Converter The HD10A is a miniature, high-quality, 10-bit analog to digital converter for HDTV. A companion to the popular HD10C D/A converter, the HD10A can add an HD-SDI output to cameras, computers with HD RGB graphics, VTRs, or other analog-only HD equipment. The HD10A accepts HD YPbPr or RGB analog and outputs three duplicate HD-SDI signals. Works in 1080i, 1035i, 1080psf and 720p with internal or external sync (tri-level).

  • Low Cost, High Quality, 10-bit HDTV A/D Conversion
  • Full Bandwidth Component HD RGB or YPbPr Input
  • 3 HD-SDI Outputs
  • Multi Standard
  • Internal or External Sync
     
     Specifications:  
     Formats:
    1080i @ 50/59.94/60 Hz
    1035i @ 50/50.94/60 Hz
    1080psf @ 23.98/24/25/29.97/30
    720p @ 59.94/60 Hz
    
    Inputs:
    YPbPr, RGB (SMPTE-274), 3x BNC
    External Sync, 1x BNC
    
    Outputs:
    HD-SDI, SMPTE-292/296
    3x BNC
    Frequency Response:
    Y +0, - .5dB to 30Mhz
    C +/- .25dB to 15Mhz
    
    User Controls:
    External Dipswitch
    RGB/YPbPr Input
    59.94/60Hz (or 23.98/24, 29.97/30)
    Internal/External Sync
    
    Power: +5V DC Regulated, 900ma (4.5 Watts), 12v optional
    Size: 5.8" x 3.1" x 1" (147 x 79 x 25mm)
    


    AJA HD10AM

    HD/SD 8-ch. AES Embedder/Disembedder, ba

    AJA HD10AM HD/SD 8 Channel AES Embedder/Disembedder The HD10AM is a dual rate 8 channel AES audio Embedder/Disembedder. The Disembedder is always functional providing 4 AES outputs. The Embedder is user selectable, on a channel pair basis, to either "pass" SDI input audio or to embed input AES audio from the breakout cable. AES inputs are sample rate converted to a 48KHz rate synchronous to the video input. The HD10AM automatically detects and configures to the input video standard.

    Specifications
    
    Formats
    HD SMPTE 292/296M
    SD SMPTE 259M
    (Automatic Configuration)
    
    Video Input
    HD-SDI or SDI BNC
    
    Video Outputs
    Follows input, 2 x BNC
    
    Audio Inputs
    4 x AES 110 ohm XLR
    
    Audio Outputs
    4 x AES 110 ohm XLR
    
    AES Audio
    SMPTE 272M/299M, 48KHz synchronous
    
    User Controls
    External Dipswitch
    Embedder on/off, Ch pairs 1/2 - 7/8
    Input group select 1/2, 3/4
    Output Group Select 1/2, 3/4
    SRC Bypass
    
    Size
    5.8" x 3.1" x 1" (147 x 79 x 25 mm)
    


    AJA HD10AMA

    HD/SD 4-ch. Analog Audio Embedder/Disemb

    AJA HD10AMA HD/SD 4-Channel Analog Audio Embedder/Disembedder
    The HD10AMA is a dual rate 4-channel analog audio Embedder/Disembedder. The Disembedder is always functional providing 4 outputs. The Embedder is user selectable, on a channel pair basis, to either "pass" input audio or embed input audio from the breakout cable. Analog audio levels are selectable. The HD10AMA automatically detects and configures to the input video standard. FEATURES

  • Dual rate HD-SDI/SDI Embedder/Disembedder
  • 4-Channel Balanced Analog Audio I/O
  • Supplied XLR breakout cable
  • HD-SDI/SDI input, 2 HD-SDI/SDI outputs
  • Dipswitch configuration
  • 5-18VDC Power


    AJA HD10AVA

    A/D, HD/SD, YPbPr/RGB to HD/SD SDI, 4-ch

    AJA HD10AVA SD/HD Analog Composite or Component Video & 4-Channel Analog Audio to SD/HD-SDI with Embedded Audio
    The HD10AVA is a miniature, high-quality, audio/video, HD/SD A/D converter. The HD10AVA automatically detects the video input format and embeds the audio inputs in the SDI/HD-SDI outputs. The HD10AVA is useful for adding an SDI/HD-SDI audio/video output to tape decks or any professional video equipment with analog outputs. The HD10AVA is especially useful for adding HD-SDI outputs to most HDV cameras or decks by using the component outputs of such devices. The HD10AVA uses a breakout cable for audio/video inputs and provides 3 SDI-HD-SDI on BNCs. Features

  • High-quality SD/HD audio/video A/D converter
  • SD component, composite or Y/C video input
  • HD analog component video input
  • Four channel balanced analog audio input
  • 3 SDI/HD-SDI with embedded audio outputs
  • 12-bit video, 24-bit audio A/Ds
  • Automatic multi-standard
  • External dip switch configuration
  • 5-18V power


    AJA HD10C2

    HD-SDI/SDI to Component Analog

    Model HD10C2 - HDTV Serial Digital to Component Converter The HD10C2, AJA`s second generation HD D/A converter, brings exciting new features. In addition to being a high-quality 10-bit HD converter, the HD10C2 is "dual-rate" and works with both HD-SDI and SDI inputs. For HD-SDI inputs, the HD10C2 outputs full bandwidth HD component or VGA-style RGBHV video. For SDI inputs, component or composite SD outputs are supported. When connected to a multi-format monitor like the Sony 20L5, the HD10C2 will automatically provide an image from almost any HD or SD input format. The HD10C2 also features 2 equalized HD-SDI outputs.

  • Low Cost, High Quality, 10-bit Dual Rate HD/SD D/A Conversion
  • Full Bandwidth HD Analog RGB or YPbPr Output (HD input)
  • Component/Composite SD Output (SD input)
  • 2 Equalized Loop-Thru HD-SDI/SDI Outputs
  • RGBHV VGA style HD output using supplied adapter
  • HD Sync Selectable Between Bi-level and Tri-Level
  • 4:3 Safe Area Graticule (HD)
  • 5-18VDC Power
  • External Dip Switch Configuration
     
     Specifications:  
     Formats:
    HD: 1080i @ 50/59.94/60 Hz
    1035i @ 50/50.94/60 Hz
    1080psf @ 23.98/24/25/29.97/30 (displayed as Interlaced)
    720p @ 59.94/60 Hz
    SD: 525 59.94Hz, 625 50Hz
    Automatic Configuration
    
    Inputs:
    HD-SDI or SDI SMPTE 259/292/296, 10-bit, BNC
    Input Equalization: 125 Meter 1694 Cable
    
    Outputs:
    HD: YPbPr, RGB (SMPTE-274)
    SD: YPbPr (SMPTE/N10, Beta® RGB, Y/C, NTSC/PAL)
    13W3 wideband analog output connector (cable supplied)
    HD-SDI/SDI equalized loop-thru, 2 x BNC
    
    Sync:
    HD: Tri-level or Bi-level, H/V Drive
    SD: normal SD sync
    
    Frequency Response:
    HD: Y +0, -.5db to 30 MHz, C +/- .25db to 13 MHz
    SD: Y +/- .25db to 5.5 MHz, C +/- .25db to 2.5 MHz
    
    User Controls:
    (External Dipswitch)
    YPbPr/RGB 
    Component/Composite (SD)
    SD Pedestal
    SD Blanking
    HD 4:3 Graticule
    SD NTSC/NTSC-J 
    Sync on Video on/off
    
    Power: +5-18VDC Regulated, 4 Watts
    Size: 5.8" x 3.1" x 1" (147 x 79 x 25mm)
    


    AJA HD10CEA

    D/A, HD/SD, SDI to HD/SD YPbPr/RGB/CV, 4


    AJA HD10DA

    Dual-Rate HD/SD 1x6 reclocking Distribut

    Model HD10DA - 1x6 HD/SD Distribution Amplifier The HD10DA is a miniature, low-cost 1x6 SD/HD (dual-rate) re-clocking distribution amplifier. Featuring six separately buffered HD-SDI outputs, the HD10DA provides automatic input cable re-clocking and equalization to 125 meters.

  • Compact SD/HD Distribution
  • Six Separately Buffered Outputs
  • Miniature Size
  • 125m HD cable equalization (1694 coax)
  • HD-SDI or SDI input, auto sensing
  • Bi-color LED indication of input lock and rate
  • Passes all ancillary data
  • +5-18V power supply
  • No dip switches or configuration required
     
     Specifications:  
    Formats: 1.5Gb, 143, 177, 270, 360 Mb, Auto Select
    
    Inputs: 1 HD-SDI, SDI (SMPTE 259/292/296), 1x BNC
    
    Outputs:
    HD-SDI, SDI, 6x BNC
    Equalizing and re-clocking
    
    Power: 5 to 18VDC Regulated, 2.5 Watts 
    Size: 5.8" x 2.4" x 1" (131 x 61 x 25mm)
    


    AJA HD10MD3

    HD Downconverter, 10-bit, HD-SDI/SDI to

    Model HD10MD3 - Miniature Digital Downconverter The HD10MD3 is a miniature digital downconverter for converting HD-SDI video to standard definition SDI and analog component/composite video. The HD10MD3 uses a full 10-bit data path and multi-point interpolation to produce broadcast quality downconverted video. In addition, the HD10MD3 converts either 1080p24 or 1080p24sf to 59.94 Hz output video using the standard 3:2 pulldown technique. The output can be formatted for either 4:3 or 16:9 standard definition monitors. 4 Ch input embedded HD-SDI audio is passed to the SDI output.

  • Low Cost Digital HD Downconverter
  • Dual rate HD-SDI/SDI Input
  • HD-SDI/SDI Outputs
  • Multi-Standard Input Including 1080p24/sf
  • 10-bit Data Path, Multi-Point Interpolation
  • Configurable for 16:9 or 4:3 Output
  • 4:3 Safe-Zone Graticule
  • Dipswitch User Configuration
     Specifications:  
     Formats:
    11035i/1080i/1080p24sf/1080p25sf/720p
    23.98/24/25/50/59.94/60 Hz Frame Rates
    
    Inputs:
    HD-SDI/SDI dual-rate, SMPTE 292/296, BNC
    
    Outputs:
    SDI, SMPTE, 259M, BNC
    YPbPr - SMPTE, EBU-N10, Betacam,
    RGB, NTSC, PAL, YC (S-Video), 3x BNC
    Downconversion:
    Multi-Point Interpolation, 10-bit Processing
    3:2 Conversion for 24p/psf Inputs
    User Controls:
    External Dipswitch
    Input Video Format
    Output Video Format
    4:3 Safe-Zone Graticule Overlay
    Pedestal (Output)
    4:3/16:9 Monitor Select
    
    Power: +5 to 18V DC, 6.5 Watts
    Size: 5.8" x 3.1" x 1" (147 x 79 x 25mm)
    


    AJA HD5DA

    HD/SD SDI Distribution Amplifier/Repeate

    Model HD5DA - HDTV Serial Digital DA The HD5DA is a miniature, low cost, 1x4 HD-SDI distribution amplifier/repeater. Featuring four seperately buffered HD-SDI outputs, the HD5DA provides automatic input cable equalization to 100 meters and automatically adapts to 143, 177, 270, 360 Mb, and 1.5 Gb.

  • Compact HD-SDI Distribution
  • Four Seperately Buffered Serial HD Outputs
  • Auto Equalization
  • Acts as a Low Cost Repeater
  • Automatic Multi-Standard
  • Miniature Size
     
     Specifications:  
    Formats: 1.5Gb, 143, 177, 270, 360 Mb, Auto Select
    
    Inputs: 1 HD-SDI, SDI (SMPTE 259/292/296), 1x BNC
    
    Outputs:
    4 HD-SDI, SDI, 4x BNC
    Equalizing
    
    Return Loss: >15dB-270Mhz (Input and Output)
    
    Power: 5VDC Regulated, 2.5 Watts 
    Size: 5.8" x 2.4" x 1" (131 x 61 x 25mm)
    


    AJA HI5

    HD/SD SDI to HDMI, includes 1-Meter HDMI

    AJA Hi5 HD-SDI/SDI to HDMI Video and Audio Converter The Hi5 converts SDI or HD-SDI to HDMI for driving HDMI monitors. Embedded SDI/HD-SDI audio is supported in the HDMI output allowing a convenient single cable audio/video connection. The Hi5 provides 2 Channel RCA style audio outputs for separate audio monitoring if needed. The Hi5 also provides a looping SDI/HD-SDI output useful for connecting additional equipment, or for “daisy chaining” multiple monitors to the same SDI-HD-SDI source.

                               
    Specifications
    
    Input
    SMPTE-259/292/296 SDI/HD-SDI, 1 x BNC
    
    Input Formats
    525i, 625i,
    720p 50/59.94/60,
    1080i 50/59.94/60,
    1080p23.98, 1080p24, 1080p25, 1080p29.97, and 1080p30
    
    Outputs
    HDMI with embedded audio
    Audio, 2 channel RCA-style
    1 equalized looping SDI/HD-SDI output, 1 BNC
    
    Power
    5VDC Regulated, 3 Watts
    
    Size
    
    4.6” x 2.4” x 1” (117 x 61 x 25mm)
    


    AJA K3BOX

    1RU EXTERNAL BREAKOUT BOX

    AJA K3-BOX The K3-Box for the KONA 3 simplifies interfacing by offering a 19-inch, 1RU rack-mountable breakout box that attaches to the KONA 3 with just two cables. This option offers all the same inputs and outputs as the standard breakout cable, and can be easily rack-mounted or placed on top of a broadcast monitor or editing desk. Additional Features

  • Simultaneous XLR and BNC AES output
  • 2-channel RCA analog audio monitoring
  • Looping BNC Genlock reference connectors
  • If you’re using a digital Betacam deck, HDCAM, DVCPRO HD, D5, D9 or even an HDCAM SR, you’ll have the proper connections
  • For use with the _link_AJA-KONA-3


    AJA R20AD

    HD/SD SDI Distribution Amplifier, 1x8, R

    Model R20AD - Universal A/D Converter The R20AD provides excellent quality, 10-bit conversion of component or composite analog video video to SDI. The R20AD accepts YPbPr (SMTE, EBU-N10), Betacam, or RGB component inputs and NTSC/PAL or YC (S-Video) composite inputs. The R20AD features a 3 Line Adaptive Comb Filter for high quality decoding of composite sources. The comb filter can be switched to 2 line or notch modes for minimum delay requirements. The R20AD also accomodates the optional FSG card (Frame Sync) offering choices for synchronizing the output video relative to an external reference or the input video. NTSC/PAL configuration is automatic. Video format, AGC, H/V blanking, and pedestal are all user configurable.

  • Excellent Quality, 10-bit, Universal A/D Conversion
  • Component, Composite, or YC Analog Input
  • 3 Line Adaptive Comb Filter
  • Full 10-bit Data Path, 2x Oversampling
  • YPbPr, Betacam, or RGB Component Formats
  • NTSC or PAL Composite Formats
  • AGC Mode
  • 4 SDI Outputs
  • Optional Frame Synchronizer
     
     Specifications:  
     Inputs:
    YPbPr SMPTE, EBU-N10, Betacam, RGB, NTSC, PAL,
    YC (S-Video), 3x BNC
    Reference: Passive Loop, 2x BNC
    
    Outputs:
    SDI (SMPTE 259M), 4x BNC
    A/D Converters: 10 Bits, 2x Oversampling
    Frequency Response:
    Y +/- .15dB to 5.5Mhz
    C +/- .15dB to 2.5Mhz
    Less Than 5% K Factor (2T)
    
    User Controls:
    Input Video Format
    Pedestal Present/Not Present
    Narrow/Wide Blanking
    AGC On/Off
    Ouput Timing Adj. (w/Frame Sync Option)
    
    Size
    Fits AJA R-Series Frames
    Compatible With Leitch® 6800 Series Frames
    
    Power: 7 Watts (8 Watts w/frame Sync Option) 
    


    AJA R20CE

    HD/SD SDI Distribution Amplifier, 1x8, R

    Model R20CE - Universal D/A Converter The R20CE SDI to Analog Video Converter provides excellent quality 10-bit conversion of SDI to component and composite video formats simultaneously. The 4 analog outputs are user configurable to NTSC/PAL, YC (S-Video), YPbPr (SMPTE, EBU-N10), Betacam, or RGB. The component and composite outputs are completely independent including optimum chroma filtering for each and independent pedestal configuration. The R20CE also features an exclusive PLL jitter filter/memory to reduce the effects of SDI jitter on the output analog video. This feature, along with the precision 4x oversampled D/A filter, provides the highest quality analog outputs - including very low phase noise in composite outputs. The optional FSG (Frame Sync/Genlock) Module allows genlock to an external reference with full timing adjustment. Without the FSG Module, the reference input provides color frame timing. The R20CE fits the AJA R-Series Rack Mount Frames, as well as other common industry frames.

  • Excellent Quality 10-Bit Universal D/A Conversion
  • Full 10-Bit Data Path, 4x Oversampling
  • SDI Input, 2 Re-Clocked, Loop-Thru SDI Outputs
  • Simultaneous Component & Composite Analog Outputs
  • YPbPr, Betacam, or RGB Component Formats
  • NTSC or PAL Composite Formats
  • Digital Noise Reduction
  • Optional Frame Synchronizer Allows Genlock to
  • Reference, Full Timing Adjsutment
     
     Specifications:  
    Inputs: SDI (SMPTE 259M), 1x BNC
    Reference: Passive Loop
    Outputs:
    Simultaneous Component and Composite Output
    YPbPr - SMPTE, EBU-N10, Betacam, RGB, NTSC,
    PAL, YC (S-Video), 3x BNC
    NTSC/PAL or Sync, 1x BNC
    Re-Clocked Loop-Thru SDI, 2x BNC
    
    D/A Converters: 10-bits, 4x Oversampling
    Clock Jitter Filtering to 2.5Hz
    Frequency Response:
    Y +/- .15dB to 5.5Mhz
    C +/- .15dB to 2.5Mhz (Component)
    C +/- .15dB to 1.3Mhz (Composite)
    Less Than .5% K Factor (2T)
    
    User Controls:
    Output Video Format
    Pedestal On/Off
    Narrow/Wide Blanking
    Digital Noise Reduction
    Output Timing Adj. (w/Frame Sync Option)
    
    Size: 
    Fits AJA R-Series Frames
    Compatible With Leitch® 6800 Series Frames
    
    Power: 7 Watts (8 Watts w/frame Sync Option) 
    


    AJA R20CE-F

    HD/SD SDI Distribution Amplifier, 1x8, R

    Model R20CE - Universal D/A Converter The R20CE SDI to Analog Video Converter provides excellent quality 10-bit conversion of SDI to component and composite video formats simultaneously. The 4 analog outputs are user configurable to NTSC/PAL, YC (S-Video), YPbPr (SMPTE, EBU-N10), Betacam, or RGB. The component and composite outputs are completely independent including optimum chroma filtering for each and independent pedestal configuration. The R20CE also features an exclusive PLL jitter filter/memory to reduce the effects of SDI jitter on the output analog video. This feature, along with the precision 4x oversampled D/A filter, provides the highest quality analog outputs - including very low phase noise in composite outputs. The optional FSG (Frame Sync/Genlock) Module allows genlock to an external reference with full timing adjustment. Without the FSG Module, the reference input provides color frame timing. The R20CE fits the AJA R-Series Rack Mount Frames, as well as other common industry frames.

  • Excellent Quality 10-Bit Universal D/A Conversion
  • Full 10-Bit Data Path, 4x Oversampling
  • SDI Input, 2 Re-Clocked, Loop-Thru SDI Outputs
  • Simultaneous Component & Composite Analog Outputs
  • YPbPr, Betacam, or RGB Component Formats
  • NTSC or PAL Composite Formats
  • Digital Noise Reduction
  • Optional Frame Synchronizer Allows Genlock to
  • Reference, Full Timing Adjsutment
     
     Specifications:  
    Inputs: SDI (SMPTE 259M), 1x BNC
    Reference: Passive Loop
    Outputs:
    Simultaneous Component and Composite Output
    YPbPr - SMPTE, EBU-N10, Betacam, RGB, NTSC,
    PAL, YC (S-Video), 3x BNC
    NTSC/PAL or Sync, 1x BNC
    Re-Clocked Loop-Thru SDI, 2x BNC
    
    D/A Converters: 10-bits, 4x Oversampling
    Clock Jitter Filtering to 2.5Hz
    Frequency Response:
    Y +/- .15dB to 5.5Mhz
    C +/- .15dB to 2.5Mhz (Component)
    C +/- .15dB to 1.3Mhz (Composite)
    Less Than .5% K Factor (2T)
    
    User Controls:
    Output Video Format
    Pedestal On/Off
    Narrow/Wide Blanking
    Digital Noise Reduction
    Output Timing Adj. (w/Frame Sync Option)
    
    Size: 
    Fits AJA R-Series Frames
    Compatible With Leitch® 6800 Series Frames
    
    Power: 7 Watts (8 Watts w/frame Sync Option) 
    


    AJA R20DA

    HD/SD SDI Distribution Amplifier, 1x8, R

    Model R20DA - SDI Distribution Amplifier The R20DA is a multi-format, 1x8 SDI Distribution Amplifier. The SDI input is re-clocked and equalized to 300 meters of cable. In addition, the multi-standard feature allows the R20DA to automatically adapt to 143, 177, 270 or 360 Mb SDI inputs automatically.

  • Re-Clocking, Equalizing SDI DA
  • SDI Input
  • 8 SDI Outputs
  • Multi-Standard
     
     Specifications:  
     Inputs:
    SDI (SMPTE 259M), BNC
    143, 177, 270, 360Mb, Auto Select
    
    Outputs:
    SDI (SMPTE 259M), 8x BNC
    Re-Clocked, Equalized
    
    Size:
    Fits AJA R-Series Frames
    Compatible With Leitch® 6800 Series Frames
    
    Power: 3 Watts
    


    AJA RD10MD

    AJA-RD10MD

    AJA RD10MD Dual HD to SD Downconverter
    The RD10MD is a 10-bit broadcast-quality dual HD down converter. Channels 1 and 2 are fully independent. Channel 1 has 2 re-clocked HD/SD-SDI outputs, and channel 2 has 1. Both channel 1 and 2 have 2 down-converted outputs, which can be independently configured as SDI or composite analog. All HD formats are supported, including 24p/psf with 3:2 pulldown. The SD output can be formatted for either 4:3 or 16:9 monitors. For 4:3 monitors, both letterbox and crop modes are supported. The RD10MD is also dual-rate (HD/SD) and will support SDI inputs. The RD10MD is compatible with AJA`s FR1 or FR2 frames. Features

  • Dual independent channel HD to SD down conversion
  • Re-clocking HD-SDI/SDI input loop outputs
  • Multi-standard HD-SDI or SDI input
  • SDI and composite analog outputs
  • 3/2 pulldown for 23.98/24 Hz p/psf inputs
  • Full 10-bit data path, multi-point interpolation
  • Configurable for 16:9 or 4:3 monitors
  • Letterbox and crop modes
  • 4:3 safe-zone graticule


    AJA RD20DA

    HD/SD SDI Distribution Amplifier, 1x8, R

    AJA RD20DA Dual Channel SDI Distribution Amplifier
    The RD20DA is a multi-standard, 2-channel, 1x4 and 1x3 SDI Distribution Amplifier. The SDI input is re-clocked and equalized to 300 meters of cable. In addition, the multi-standard feature allows the RD20DA to automatically adapt to 143, 177, 270, or 360 Mb SDI inputs. Features

  • 2 Channel Re-Clocking, Equalizing SDI Distribution Amplifier
  • 2 Separate SDI Inputs,
  • 1x3, 1x4 SDI Outputs
  • Multi-Standard: 143/177/270/360 Mb


    AJA RH10DA

    HD/SD SDI Distribution Amplifier, 1x8, R


    AJA RH10MD

    Downconverter, 10-bit, HD-SDI to SDI and

    Model RH10MD— HD down converter and HD-SDI distribution amplifer The RH10MD is a 10-bit broadcast-quality HD down converter and HD-SDI/SDI distribution amplifer. There are 4 re-clocked HD-SDI/SDI outputs and four down-converted SD outputs. The SD outputs can be individually configured as analog or SDI - analog can be component or composite. All HD formats are supported including 24p/psf with 3:2 pulldown. The SD output can be formatted for either 4:3 or 16:9 monitors. For 4:3 monitors both Letterbox and Crop modes are supported. The RH10MD is also dual-rate (HD/SD) and will support SDI inputs. 4 Ch AES embedded audio is passed through to the SDI outputs. The RH10MD is compatible with AJA`s FR1 or FR2 frames.

  • Re-clocking 1x4 HD-SDI/SDI DA
  • Multi-Standard HD-SDI or SDI Input
  • SDI and Component/Composite Analog Outputs
  • 3/2 Pulldown for 23.98/24 Hz p/psf inputs
  • Full 10-bit Data Path, Multi-point Interpolation
  • Configurable for 16:9 or 4:3 Monitors
  • Letterbox and Crop Modes
  • 4:3 Safe-Zone Graticule
     
     Specifications:  
     Formats:
    HD: 1080i 50/59.94/60 Hz
    1080p/psf 23.98/24/25/29.97/30 Hz
    720p 23.98/24/25/29.97/30/50/60 Hz
    
    Inputs: HD-SDI or SDI SMPTE 259/292/296, 10-bit, BNC
    
    Outputs:
    SDI, SMPTE 259M, 10-bit, BNC
    YPbPr - SMPTE, EBU-N10, Betacam
    RGB, NTSC, PAL, Y/C (S-Video), 10-bit
    3 x BNC
    
    Downconversion:
    Multi-point interpolation, 10-bit processing
    3:2 conversion for 23.98/24p/psf inputs
    
    User Controls:
    External Dipswitch
    Output Video Format
    4:3/16:9 Monitor Select
    Letterbox/Crop
    Pedestal (Output)
    4:3 Safe-Zone Graticule Overlay
    
    Size:
    Fits AJA R-Series Frames
    
    Power: 5 Watts 
    


    AJA RH10UC

    HD Upconverter, 10-bit, SDI to HD-SDI

    Model RH10UC SDI to HD-SDI Upconverter, 10-bit The RH10UC is a 10-bit SD to HD up-converter. Using motion-adaptive de-interlacing and high quality digital scalers, the RH10UC provides excellent Broadcast quality HD video from SD sources. Output HD video is selectable between 720p and 1080I formats. 4:3 to 16:9 aspect ratio conversion is selectable between 4:3 pillarbox, 14:9 crop, 16:9 anamorphic, and 16:9 zoom. Input SD ITU Rec. 601 color space is converted to ITU Rec. 709. The RH10UC passes 8 channel embedded audio with a compensating delay. Additionally, the RH10UC can operate as a stand-alone HD or SD Frame Synchronizer. The RH10UC is compatible with AJA’s FR1 or FR2 frames.

  • Broadcast-Quality 10-bit SD to HD Upconverter
  • Motion-adaptive de-interlacing
  • Frame Synchronizer function with Genlock input
  • Selectable aspect ratio conversion
  • Selectable HD output format
  • HD-SDI or SDI stand-alone Frame synchronizer modes
     
     Specifications:  
    Input Formats: 525/59.94, 625/50, SMPTE 259M
    Output Formats: 1080i 50/59.94, 720p 59.94 Hz (50Hz output requires 50 Hz input)
    Upconversion: Motion adaptive, Multi-point interpolation, 10-bit processing
    Inputs: SDI, BNC
    Reference: 2 x BNC, looping
    Outputs: Input Loop, 2 x BNC, Equalized
    HD-SDI, 4 x BNC
    User Controls
    Mode: Upconvert, Frame Synchronizer, Output Format, Aspect Ratio Convert Select, and Output Timing
    Size: Fits AJA R-Series Frames
    Power: 6 watts
    


    AJA FIDO-TR

    OPTICAL FIBER TO SD/HD/3G


    AJA ADAPTER

    Replacement Adapter for HD10C2